Care and cleaning recommendations

Resysta surface treatment and maintenance

Resysta FVG stain

Resysta RFS sealer

Maintenance

Finishing of the sealing in case of external mechanical damages is possible and recommended for aesthetic reasons only. Even after ten years, the surface displays negligible visible changes in color. In fact, the color becomes more intense, but not more than approximately 10%.

cleaning

Cleaning

Resysta RFS seals the surface. Thanks to this sealed structure, dirt particles only adhere to the surface and can be removed easily with a gentle stream of water or with a soft brush.

refresh

Care

Special care is not necessary, except for cleaning. Therefore, elaborate sanding and painting of the facade is not required in the long run.

RFS Sealer

RESYSTA Finishes
(https://www.youtube.com/watch?v=Xt6GcCSlFRs)

Resysta untreated

Maintenance

Maintenance of the untreated TruGrain material is not necessary.

cleaning

Cleaning

The surface is colored by means of transparent-colored Resysta FVG stains. Dirt, caused by environmental influences, may deposit through the open structure. This can, however, easily be removed by means of a gentle stream of water or with a soft brush. Persistent dirt can also be removed by gentle sanding.

refresh

Care

The stain can be reconditioned in diluted form (for example: 3:1 mixture ratio with water). Beforehand, the surface must be cleaned carefully and gently sanded.

Wallcladding 4Ch

General Recommendation

  • We recommend a yearly inspection of the facade for damages.
  • Resysta FVG and Resysta RFS were especially developed for RESYSTA material and are perfectly adapted for this material.
  • Only these surface treatments may be employed exclusively.
  • Since soiling can occur, especially in areas exposed to direct spray-water and in the gable area, these surface areas should be sealed with Resysta RFS.

Enter your keyword